What is Split.AG?
SPLIT.AG is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly.As requirements for demolishing rock and reinforced concrete in construction increase in tight quarters, the use of explosives and explosive agents is becoming more restricted as far as safety and environmental pollution problems are concerned. SPLIT.AG is the solution.
Advantages
- Controlled Demolition
- Dust-free
- Vibration Free
- No License Required
- No Flying Debris
- Environmental Friendly
- Silent Operation
- Rapid Usability
- Economy
- Safety for Vicinity
Applications
- Demolition of concrete and reinforced concrete
- Demolition of rock and natural stone
- Block quarrying in the natural stone industry
How to use it?
- Drill holes according to your drill design
- Pour proper quantity of SPLIT-AG chemical powder into cold water according to the correct proportion, then fully stir and mix them to completely slurry
- Fill in the mixture into holes
- After 2-8 hours, the rock&concrete will be splitted naturally.
| Type | Usable temperature |
| SCA-IV | 40℃-50℃ ( 104℉-122℉) |
| SCA-I | 25℃-40℃ ( 77℉-104℉) |
| SCA-II | 10℃-25℃ ( 50℉-77℉) |
| SCA-III | -5℃-10℃ ( 23℉-50℉) |
Pre-drilled hole design table
| Material | Hole design | ||
| Diameter(mm) | Hole spacing | Depth | |
| Soft stone quarrying | 28-38 | 200-300mm | 105% of height |
| Hard stone quarrying | 30-40 | 200-300mm | 105% of height |
| Plain concrete | 30-40 | 300-500mm | 80% of height |
| Reinforced concrete | 35-40 | 150-300mm | 90% of height |
